custom electronics (custom made electronics) design & manufacture by Trinity Electronics Systems

  Power Measurement
  Audio Products
  Lighting Products
  Industrial Products
  Misc. Products

Outdoor Ready Power Distribution Panels

There are currently 2 models available to suit your needs. The 90 amp PDP12, and the 180 amp PDP32.
Click on any image to see a high resolution (1024x768) picture.

PDP-12

- outlets for 12 cords
- 6 duplex outlets each with a 15 Amp breaker
- outlet are colour coded to show which leg is supplying power (although not shown in these pictures)
- indicator lights for incoming power
- total load 6 x 15 Amp circuits = 90 Amps
- single phase 240/120 VAC, 3 wire (50 Amp feed) or three phase, 208 VAC, 4 wire (30 Amp feed)
- 1" box connector for cabtire entrance
- same package as the 8 channel sequencer
- mounts on same stands as the sequencers (or set directly on floor or ground)
- mounts outside in rain or snow
- stainless steel hardware to prevent corrosion
- cabtire not supplied (length determined by the customer)
- aluminum chassis, white ABS cover
- CSA approved

PDP-32

- outlets for 32 cords
- outlet are colour coded to show which leg is supplying power
- 16 duplex outlets each with a 15 Amp breaker
- indicator lights for incoming power
- total load: 16 x 15 Amp circuits=180 Amps
- can be built for single phase 220/240VAC (100 Amp feed) or three phase 208 VAC (60 Amp feed)
- 1.25" box connector for cabtire entrance
- mounts on same stands as the sequencers
- mounts outside in rain or snow
- stainless steel hardware to prevent corrosion
- cabtire not supplied (length determined by the customer)
- optional current transformers to monitor load balance and maximum load
- White powder coated steel
- CSA approved